Northern Coatworks

Stand OutFinishes

Start a project
Fabbrica Coming soonRare motorcycle and car parts, reverse engineered in Slaithwaite. Explore Fabbrica
01 / The craft

Services

Considered preparation. Precise finishing. Work that respects the part beneath the surface.

Fabbrica Coming soon

Lost parts,
remade.

Custom reverse engineering for rare and discontinued motorcycle and car parts.

Explore Fabbrica ↗
Bahder Honda No. 28 sidecar and its two riders on the course
02 / Racing partnership

Built toPerform

In partnership with Bahder Performance & Machine, we prepare and finish components for the No. 28 Honda sidecar — from engine detail to high-temperature exhaust work.

Northern Coatworks × Bahder Performance & Machine
Bahder Performance and MachineBahder racing number 28
Bahder Performance & Machine × Northern Coatworks

The Bahder
Honda 750

Bahder approached us with heat issues and a classic sidecar racing programme to prepare for. The brief brought together heat management, durable finishes and the careful preparation of the Honda’s engine components.

From vapour-blasted aluminium to E-Series black components, gold casings and V-Series exhaust work, each part received a finish chosen for its job.

Bahder Honda 750 engine fitted to the sidecar, with its gold rocker cover, carburettors and cockpit instruments
Honda 750 · Finished engine back in the outfit
Preparation / Protection / Detail

From arrival
to assembly

Two Honda engines on the workshop bench before preparation, with aged surfaces and old finishes
01 / The starting point

As they arrived

The Honda engines before preparation. This is where the work began: assessing the surfaces and planning the treatment for each component.

Four exhaust collets on the workbench before preparation, with carbon deposits and discoloured surfaces
02 / Before preparation

The exhaust starting point

The collets as they arrived, showing the deposits and surface condition before cleaning and refinishing.

Clean aluminium Honda cylinder head after vapour blasting, showing its cast texture, studs and machined faces
03 / Vapour blasting

Back to clean aluminium

Vapour blasting cleans the alloy and restores a consistent satin appearance, bringing the casting detail back into view.

Vapour-blasted Honda engine castings, cylinder fins and machined faces viewed from the front
04 / Vapour blasting

The engine in clean alloy

The cylinder head, barrels and crankcases together after vapour blasting, with the original casting detail clearly visible.

Reverse view of the vapour-blasted Honda engine with four ports, cooling fins and clean aluminium crankcases
05 / Vapour blasting

A closer look around the engine

A second view of the prepared engine, showing the satin aluminium across the crankcases and cooling fins.

Vapour-blasted aluminium crankcase halves with clean circular openings and cast surface detail
06 / Vapour blasting

Crankcase detail

The crankcase halves after cleaning, revealing the cast texture, openings and machined surfaces.

Close view along the clean Honda cylinder head showing four welded ports, studs and valve guides
07 / Vapour blasting

The detail in the head

A closer view along the cylinder head, from the four ports to the studs, guides and cooling fins.

Vapour-blasted Honda cylinder head, four-cylinder barrel and crankcase halves laid out on a grey surface
08 / Vapour blasting

Prepared, part by part

The engine components laid out together after vapour blasting, showing the finish across the head, barrels and crankcases.

Four finished brake discs with black coated centres and bare metal friction surfaces
09 / Blackout E-100

Detail without compromise

The wheel-disc centres are finished in Cerakote E Series Blackout E-100, with the braking surfaces left uncoated.

Black coated plates, brackets, spacers and brake disc centres arranged on a grey background
10 / Blackout E-100

Protection across the components

Bahder plates, brackets, spacers and wheel-disc centres finished in Cerakote E Series Blackout E-100. The brake friction surfaces remain uncoated.

Gold finished Honda engine covers, rocker cover, caps and smaller components laid out together
11 / Gold engine finish

A finish across the whole engine

Casings, covers, caps and smaller fittings carry the same gold finish, with internal and mating surfaces kept clean.

Close view of the gold Honda OHC 750 rocker cover with clean alloy openings and threads
12 / Rocker cover

The original detail, clearly defined

The Honda casting marks, edges and texture remain visible beneath the finish. Openings, threads and mating faces are masked for assembly.

Gold finished rocker cover, threaded cap and fittings with exposed machined alloy surfaces
13 / Gold finish

Precision in the small details

Gold detailing carries through the cover, caps and fittings, with threads and mating surfaces kept clear for assembly.

Close view of a gold engine side cover showing the surface texture and bolt recesses
14 / Casing detail

Consistent coverage

A closer look at the finish across the broad faces, curved edges and recessed details of the engine casing.

Three Bahder pistons with bronze coloured thermal barrier coatings on their crowns and bare alloy skirts
15 / Piston crown coating

Heat management inside the engine

A thermal barrier coating on the piston crowns is designed to limit heat transfer into the pistons. It forms part of the response to Bahder’s original heat-management brief.

Four gold exhaust collets with two-bolt flanges and spring attachment loops
16 / Exhaust collets

Where the exhaust meets the head

The four gold collets continue the engine’s finish at the cylinder-head connections, carrying the detail into the exhaust assembly.

Gold finished exhaust tube on a grey surface, with a red internal coating visible at its opening
17 / High-temperature exhaust work

Prepared for the heat

V-Series coating is selected for high-temperature exhaust work. The gold outer finish and red interior carry the project’s colour detail through to the outlet.

Gold exhaust with red interior fitted beside the rear wheel of the red Bahder sidecar outfit
18 / Back on the outfit

From the bench to the sidecar

The finished exhaust in place, alongside the gold engine details and red bodywork of the Bahder outfit.

Gold Honda rocker cover, four carburettor openings and cockpit instruments fitted in the red and silver sidecar
19 / Back in the outfit

Ready for the next outing

The finished engine back in place, bringing the gold detailing and clean alloy together in the assembled outfit.

1 / 19

Classic TT 2026
The racing programme

Out of the workshop.
Onto the course.

The work supports Bahder’s full UK classic racing calendar. The outfit has taken part in the Classic TT’s Classic Sidecar Parade and run at Cadwell Park, putting the finished components to work beyond the workshop.

The No. 28 Bahder Honda sidecar and both riders on the course; photograph by Colin Casey
Bahder Honda No. 28 · On the course · Photography: Colin Casey
Bahder’s season finale / October 2026

–Lydden Hill · Kent

Lord of Lydden& Sidecar Burn Up

Stormy finish. Strong send-off. Adam Holden and Trevor Johnson closed Bahder’s 2026 season at Lydden Hill, taking on a soaking Saturday before finishing fourth in both Sunday BEARS and Classic Sidecars races.

The No. 28 Honda 750’s quickest lap of the weekend was 51.720 seconds. Now the outfit heads for a winter strip-down, giving us a closer look at the piston crown coating and the high-temperature finishes on the exhaust collets and exhaust.

The Bahder Honda 750 and crew in the Lydden Hill paddock
Bahder Honda 750 / In the Lydden Hill paddock
The Bahder Honda 750 engine with gold coated covers and four carburettors
Northern Coatworks / Gold engine finishes
03 / The people behind the projects

Stories

04 / Customer testimonials

From the people
behind the projects.

Read Facebook reviews
05 / Behind the finish

The process

The finish is only as good as the preparation. A closer look at the care, control and detail behind every component.

01 / A clean start

Cleaning & degreasing

Oil, grease and surface contamination are removed before preparation begins. Cleaning is chosen to suit the material and the condition of the part, giving the next stage a sound starting point.

A stripped Volkswagen fan housing in the dry-blasting cabinet
02 / Surface preparation

Dry blasting & prep

High-grade aluminium oxide removes unwanted surface material and prepares the metal for coating. The abrasive preparation is matched to the component and the chosen finish.

Prepared pistons, engine covers and brackets suspended on racks in the oven for gassing out
03 / Controlled heat

Gassing out

Prepared components are suspended in the oven for controlled heating. Where required, this helps bring retained oils and contamination to the surface. Parts are then checked and cleaned again as needed before moving on to masking and coating.

04 / Protect the detail

Precision masking

Threads, bores, mating faces and other critical areas are carefully protected. Close inspection, fine trimming and attention to every edge keep the coating exactly where it belongs.

A gloved hand lifting green masking film from an engine cover beside gold-coated covers
Clean boundaries
Green masking film carefully fitted across a cylinder head's machined face
Critical surfaces protected
Fine detail work on a masked component viewed through an illuminated magnifier
Attention to detail
Illustrative render of a vinyl plotter and gloved hands weeding a precisely cut green stencil
05 / Custom by design

Vinylstencilling

Vinyl-stencilling concept render

Custom designs, cut with control. We use an industry-standard vinyl plotter to produce accurate stencils for lettering, logos, graphics and precise colour breaks.

Each design is sized to the component, cut and carefully weeded before application. The result is crisp definition and repeatable accuracy, from a subtle personalised detail to a complete custom scheme.

  • Custom designs
  • Precise edges
  • Repeatable cuts
06 / Bring it together

Coating & finishing

The chosen coating is carefully applied, with coverage and detail checked throughout. Curing follows the requirements of the coating system, before masking is removed and the finished component is inspected.

A spray gun applying a gold finish to a masked engine component
Controlled application
Spray equipment, fine trimming tools and green masking tape laid out on the workshop bench
The tools behind the finish

Every job has its own route. These stages describe our coating preparation; blasting-only work and custom finishes follow the process their parts need.

06 / The workshop

About
Northern Coatworks

Specialist finishing for the machines and components people care about.

From a single engine part to an involved restoration, each project begins with the material, its history and the finish it needs. Our work brings together surface preparation, vapour blasting, Cerakote and 2K coating in a workshop built around attention to detail.

Close-up of specialist metal components in the Northern Coatworks workshop
Slaithwaite / Huddersfield / West Yorkshire
07 / Your project

Have a project
in mind?

Call us to talk through your parts and the finish you have in mind.

Call the workshopContact & directions

Find us

Northern Coatworks Ltd
Unit 16a Upper Mills
Canal Side
Slaithwaite
Huddersfield
HD7 5HA
Open in Google Maps

Give us a call

07883 065 28407540 857 496

Email & follow

info@northerncoatworks.co.uk